拖拉机
LTX2004拖拉机
材料：
交期：
描述：
规格：
交期：
描述：
规格：
主要技术特点
● 匹配东方红高压共轨发动机，动力储备大，油耗低,经济效益高。
● 选配潍柴高压共轨发动机，性能先进，噪音小，动力强劲。
● 进口高强度粉末冶金材料离合器片，传递能力高，效果可靠。
● 配备KA预滤器和唐纳森空滤器，过滤效果好,维护方便。
● 液压系统独立油路，清洁度高，故障率低。
● 可选装多态变频开关，不同工况对应不同动力，满足省油增效的要求● 可汉字显示故障的组合仪表，方便用户随时监控整车状态。● 整机带底盘散热系统，有效控制底盘油温，可靠性高。● 可汉字显示故障的组合仪表，方便用户随时监控整车状态。
● 整机带底盘散热系统，有效控制底盘油温，可靠性高。● The DongFangHong series engine equipped leads a large power reserve, low fuel consumption and high economic benefits.
● Optional the WEICHAI high-pressure common-rail engine is offered with advanced performance, low noise and strong power.
● The imported high-strength powder metallurgy material is used for clutch disc with reliable transmission performance.
● The KleanAire prefilter and the Donaldson air filter are installed with good filtering effect and convenient maintenance.
● Independent oil circuit of hydraulic system ensure high cleanliness and low failure rate for it.
● Optional multi-state variable frequency switch is offered for corresponding different power to various working conditions, moreover meeting the requirements of fuel-saving and efficiency.
● Combined dashboards displaying faults in Chinese are convenient for users to monitor the whole tractor condition at any time.
● Chassis cooling system is equipped for overall unit, which can effectively control the chassis oil temperature and facilitate maintenance.
| 型号Tractor Model | LTX2004 | |
| 驱动方式Drive Type | 4X4 | |
| 外形尺寸 长×宽×高 Overall Dimension L×W×H(mm) | 5211*2350*3140 | |
| 轴距Wheel base(mm) | 2688.5 | |
| 前轮轮距Front wheel tread(mm) | 1980 | |
| 后轮轮距Rear wheel tread(mm) | 1662(单轮)-2209（双轮） | |
| 最小离地间隙Min.ground clearance(mm) | 460 | |
| 最小转向圆半径Min.steering radius(m) | 8.5 | |
| 最小使用质量Min.operating weight(KG) | 6600（单）6960（双） | |
| 变速箱挡数（前进+后退）Gearbox gears number | 24F+8R | |
| 速度范围Speed | 前进Forward(Kw/h) | 0.29-30.45 |
| 后退Reverse(Kw/h) | 0.29-30.45 | |
| 发动机Engine | 型号Model | LR6M3LR22/1324 |
| 额定功率Rated power(Kw) | 147.5 | |
| 额定转速Rated speed(r/min) | 2200 | |
| 轮胎型号 Tires spec. | 前轮Front tires | 14.9-26 |
| 后轮Rear tires | 18.4-38 | |
| 转向方式 Steering Type | 全液压前轮转向 Full hydraulic front wheels steering | |
| 最大提升力Max.lifting force(KN ) | 35.4 | |
| 动力输出PTO | 形式Type | 后置、独立式Rear-mounted,Independent type |
| 转速Speed(r/min) | 540(540E)/720(720E) | |
| 功率Power(Kw) | 123.5 | |
| 耕深控制方式Control type of ploughing depth | 力控制、位控制、力位综合控制、浮动控制 Force Control、Position Control、Force and position combined control、Flotation Control | |
| 最大牵引力Max.traction force(KN) | 55.3 | |
| 前/后配重质量Front/rear Ballast(KG) | 1120/1040(单)无（双） | |
